克魯勃-專業潤滑產品及服務

Klubersynth UH1  6-680

Klubersynth UH1 6-680

Klubersynth UH1 6-680 Product description Klübersynth UH1 6 oils are gear oils on a polyglycol basis. They have a high scuffing...

    KLUBER - Klubersynth UH1 6-680 詳情


    Klubersynth UH1 6-680

      Product description

      Klübersynth UH1 6 oils are gear oils on a polyglycol basis. They have a high scuffing load capacity and micro-pitting resistance. These oils have also proved their good wear protection in rolling bearings on the FAG FE8 test rig for gear oils.


      Benefits for your application

      • The oils meet the requirements according to DIN 51517-3, CLP. Corresponding gears can be switched to Klübersynth UH1 6 oils without prior consultation with the gear manufacturer provided the general application notes are observed.

      • KlüberComp Lube Technology involves the selection of high-quality raw materials and individual consultation and services by Klüber Lubrication, ensuring high-performance lubrication of different gearbox components.

      • Registered by NSF as H1 lubricants for use in food-processing and pharmaceutical industries, comply with FDA 21 CFR Sec. 178.3570.

      • ISO 21469 certified – supports the compliance with the hygienic requirements in your production. You will find further information about ISO Standard 21469 on our website www.klueber.com.

      • The oils' high micropitting resistance according to FVA 54 GFT > 10 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.

      • The good wear protection of the rolling bearings prevents premature bearing failure.

      • Much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the base oil; thus maintenance intervals can be extended and in certain cases even lifetime lubrication is possible.

      • Owing to the wide service temperature range it is possible in many cases to use just one viscosity grade for both low and high temperatures.

      • The optimum friction behaviour of the polyglycol base oil reduces power losses and improves efficiency.

      • The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricating film even at elevated and high temperatures.

      • Seals made of 72 NBR 902, 75 FKM 585 and 75 FKM 170055 are resistant to Klübersynth UH1 6 oils.

      • Approved by Siemens (Flender), Siemens Geared Motors, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, ZAE Antriebssysteme, Baldor, Boston Gear, Bonfiglioli, Watt Drive etc.


    Klubersynth UH1  6-680

    上一個:Klubersynth UH1 4- 18
    下一個:Klubersynth UH1 6-220

Downloads

Klubersynth UH1 6-680_PDS.PDF
產品說明書
Klubersynth UH1 6-680_MSDS.PDF
MSDS安全報告
Klubersynth UH1 6-680_FG.PDF
食品級認證證書
Klubersynth UH1 6-680相關資料請向網站客服人員索??!

聯系方式

德國克魯勃潤滑油

深圳佐宇實業有限公司

地址:深圳市寶安區沙井街道上寮五區81號豐盛大廈

電話:0755-29752212

傳真:0755-29752212

24小時:0755-29752212

云鼎彩票登入
  • <input id="yewms"><u id="yewms"></u></input><menu id="yewms"></menu>
    <input id="yewms"><acronym id="yewms"></acronym></input>
  • <menu id="yewms"></menu>
    <input id="yewms"></input>
    <input id="yewms"></input>
    <menu id="yewms"></menu>
    <object id="yewms"><acronym id="yewms"></acronym></object><input id="yewms"><tt id="yewms"></tt></input>
    <input id="yewms"><u id="yewms"></u></input>
  • <menu id="yewms"><strong id="yewms"></strong></menu>
    <input id="yewms"></input>
  • <nav id="yewms"></nav>
  • <nav id="yewms"><u id="yewms"></u></nav><menu id="yewms"></menu>
    <menu id="yewms"><u id="yewms"></u></menu>
    <input id="yewms"><u id="yewms"></u></input><nav id="yewms"></nav>